Building a computer without case to be mounted on a wall. Every cable managed away.
Android works fine, Ubuntu touch is making some of the same mistakes. I just want Linux on my phone.
I always wanted to build my own tube amp since I heard about them because they are quite expensive. The problem is that most run on high voltages (around 300V) so it's not safe to poke around in. Now I'm gonna make one that runs on 19V.
Thomann just released their own amp attenuator. Let's measure it and take it apart.
This is a small guide how to automate letsencrypt if your're using haproxy to terminate your SSL connections
I read a few articles about BTRFS and ZFS and about cheap chinese electronics so I thought I should combine that. So I bought the cheapest 1GB usb thumbdrives I could find on ebay. With four thumbdrives I can test various raid setups with BTRFS and ZFS and benchmark them.
I always tell people that the problem with phone cameras is the lenses. This isn't a thesis that is easy to test because you can't swap the lens on a phone without destroying it. But now the Raspberry pi has a camera module that's basically a phone camera sensor.
This is a manual for decoding P2000 messages in Linux. These are received with an RTL-SDR dongle using the rtl_fm tool and decoded using the new FLEX decoder in multimon-ng.
A few weeks ago I replaced my Line6 Podxt live multieffect pedal with a guitar amp, cabinet and 2 pedals. The amp is a Kustom Defender 5H head and I use a Kustom 1x12 cab with it